Programming HD007 keypad to the Pro controller:


CODE LEARNING
a. 0 ACC ON, press Valet Switch 10 times within 5 seconds. Siren will
sound 3 times to
indicate entering code learning. Then press any button on the remote
control within
15 seconds and siren will chirp as confirmation. The chirp times will
correspond to
the key fobs learned. With the second key fob learned, siren will chirp
twice, and
so on.
b. 0 Then enter 0 *, 1,3,5,7,9,0 * code on the keypad or it will time
out and you must start at step 1.
Turn ACC off and test remotes and keypads.